CALYPSO operator
Blinker
Aerial
Key or digital selector
PREPARATORY STEPS
The new series of operators CALYPSO, has been devised to serve gates up to 500 Kg with leaf up to 3 meters wide (look at the table
technical data). Before proceeding with the installation, please make sure that your gate opens and closes freely, and that:
• Hinges and pins are in optimum condition and properly greased.
• No obstacles are within the moving area.
• There is no friction with the ground or between the leaves.
• Your gate shall be equipped with central
All manuals and user guides at all-guides.com
INSTALLATION LAYOUT
cable 4 x 1 mm
2
cable 2 x 1,5 mm
2
cable RG-58
cable 2 x 1 mm
2
and side
stops, which are fundamental for the good system operation.
Internal photocells
External photocells
Safety edge (EN 12978)
Control unit
19
cable 4 x 1 mm
2
(RX)
cable 2 x 1 mm
2
(TX)
cable 4 x 1 mm
2
(RX)
cable 2 x 1 mm
2
(TX)
-
cable 3 x 1,5 mm
2