Sigma BC 1909 HR STS Mode D'emploi page 3

1 INTRODUCTION AND PACKAGING CONTENTS
1 PACKAGING CONTENTS
Bike computer
BC 1909 HR
STS chest belt
including
elastic belt
STS speed
transmitter
STS cadence
transmitter
2 ASSEmBly
The illustrations for these installation texts can be found on the enclosed folding sheet!
INSTAllING THE BIKE BRACKET
k The bracket can either be installed with cable ties
(permanent attachment) or optionally using the O-rings.
k Handelbars or stem.
k Remove the yellow foil.
4
www.sigmasport.com
All manuals and user guides at all-guides.com
k Spoke magnet
k cadence magnet
k handlebar bracket
k battery
compartment key
k fastening material
1 2 3 4
2 ASSEmBly
INSTAllING THE TRANSmITTERS –
SPEED AND CADENCE
k Both transmitters can either be installed with cable ties
(permanent attachment) or optionally using the O-rings.
k In order to achieve the necessary 12 mm or less install the transmittter
and the magnet closer to the wheel hub.
This does not affect the wheel size setting.
PUTTING ON THE CHEST BElT
k Rub water or cardio-gel on the electrodes.
2.1 INSTAllATION OF THE 2 ND BIKE
Switching between BIKE 1 and BIKE 2 is automatic.
A second speed transmitter must be used.
(Accessory set "BIKE 2" Ref. No.: 00417, "BIKE 2 incl. cadence" Ref. No.: 00415)
Green light will turn red when bike 2 is activated.
3 START-UP
For reasons of energy consumption, the BC 1909 HR is supplied
without a battery.
Please insert the battery by opening the battery compartment
cover with the tool provided. Once you have inserted the battery,
close the battery compartment with the aid of the tool.
The display automatically jumps to setting mode.
Skip to language setting mode.
5 6 7 8
9
12 13 14 15 16
17 18 19
21 22 23 24
10 11
1909
BC 1909 HR 5