Publicité
Les langues disponibles
Les langues disponibles
EN
An
air
intake
be provided
somewhere
the
cabinet
run
free air in. In this example a
plinth
vent
is
underneath
the refrigerator.
A cutout should be made in
the plinth below the fridge/
freezer and this finished neatly
using
the
air
Ensure there is also a gap at
the back of the base of the
cabinet for air to flow
the
back
of
the
with a
minimum
30mm
from the back of the
fridge to the back of the cabinet.
The top of the cabinet needs
to be vented into the room.
Required size of vent opening:
200cm2.
If the furniture does not allow
free air into the room then a
plinth
vent, or
other means
of
ventilation
needs to
provided to ensure a natural
flow of air.
The open channel at the rear is clearly shown. For the
correct operation of the appliance it is important that the
top of the housing unit is not blocked off.
A ventilation hole is required in the plinth of the unit; this
allows air to be drawn over the compressor and condenser.
As a rule, the more air that can get in and out, the better and
more efficient the operation of the product.
14
should
Side View
in
to
allow
shown
Refrigerator
outline
vent
grille.
up
appliance
space
of
be
plan view of rear ventilation gap
Min. 30 mm
Publicité
