Publicité
Les langues disponibles
Les langues disponibles
7 - Installation preparation
EN
This appliance must never be installed close to heat sources,
e.g. heating elements or cookers, nor in damp places.
Seek the help of another individual, or two, when installing
this appliance. This appliance may have sharp edges. Wear
adequate PPE for the task and environment.
• To ensure the appliance is level, you should use the height
adjustable feet at the front of the appliance.
• The condenser system at the rear of the appliance must
not touch the rear wall. The greater the gap, the better.
• The appliance must be installed with adequate ventilation
to allow air to escape and that there is space between
the rear of the appliance and the wall.
12
Ventilation
Ventilation is the main consideration when installing
any refrigeration unit into a fitted kitchen. The heat
removed from the cooling compartment needs to be
dissipated away from the appliance and into the
atmosphere. Incorrect ventilation can lead to premature
compressor failure, excessive power consumption, total
system failure and may invalidate the warranty provided
with the appliance. This appliance is intended to be installed
into a cabinet, therefore the instructions on the following
pages need to be met so that the fridge operates properly
and to meet warranty requirements.
Publicité
