Trixie Bubble Stream Conseils D'utilisation page 15

E Cleaning th Pump
In continuous use, the pump needs to be cleaned every 3-4 weeks to
prevent wear.
Please note:
Unplug the drinking fountain before each maintenance. Do not touch any
moving parts.
Proceed as follows:
1. Remove the cover of the pump and pull the rotor out of the plug-in
connection.
2. Clean all parts with a small brush or a Q-tip, then rinse the parts in clear
water. Do not use any detergent for cleaning.
3. Finally plug the rotor back on the pump casing carefully and place the
cover on top.
Rotor casing
Casing
Rotor
3