Sony GENEZI MHC-GNX660 Mode D'emploi page 7

1 Connect the front speakers.
Connect the speaker cords of the front
speakers to the FRONT SPEAKER
terminals as shown below.
2 Connect the sub woofer.
Connect the sub woofer cord of the sub
woofer to the SUB WOOFER terminal as
shown below.
Note
Be sure to make this connection before you
connect the unit's power cord to a wall outlet.
3 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cord.
(MHC-GNX660 only)
VIDEO OUT
When using a TV
Turn on the TV and select the video input so that
you can view the pictures from this system.
White
Purple
4 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally
5 For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
Brazil model only
VOLTAGE SELECTOR
220V
127V
6 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press
?/1
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in
the event of trouble.
AM loop antenna
Other models
VOLTAGE SELECTOR
220V 240V
120V
, the system turns on
continued
7 GB