SOMFY Sonesse Ultra 50 RTS Notice page 4

EN
2.1.3. Motor/tube assembly
1) Slide the motor into the roller tube.
•
wheel and not to the motor.
3) Slide the end cap into the roller tube and ensure that the
assembly is solid.
2.1.4. Installing the motor/tube assembly
The motorised product must not be compressed between the brackets.
bracket f and onto the motor bracket g
Ensure that the motor/tube assembly is secured onto the
when the roller blind reaches the lower end limit position.
2) For star head motors, ensure the stop ring h in place.
2.2. WIRING
Cables which pass through a metal wall must be protected and isolated using a grommet
-
-
120V
230V 50 Hz
220V
4
Neutral (N)
White Black
Blue Brown
US PIGTAIL CONNECTOR CABLE
Neutral (N)
White Black
Copyright
Earth ( )
Green
Yellow/Green
Earth ( )
Green
2014 - 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
Sonesse Ultra 50 RTS
1)
2)
15 mm
L1
3)
1)
g
2)
h
N
L
N
L
5 mm
20 mm
f