Sonesse Ultra 50 RTS
1.2 LIABILITY
attached Safety instructions
The motor must be installed by a motor and home automation professional, according
to instructions from Somfy and the regulations applicable in the country in which it is
commissioned.
instructions
Safety instructions
2. INSTALLATION
Instructions which must
installing the motor.
To optimize ultra quiet operation, the mechanical plays between motor, accessories, tube
2.1. INSTALLATION
2.1.1. Preparing the motor
47mm.
1) Fit the accessories required to integrate the motor in the
• Fit the crown a, the motor wheel b and the stop wheel c
on the motor.
The stop wheel must be screwed with a torque ranging
between 1.5 and 1.8 Nm.
2.1.2. Tube preparation
1) Cut the roller tube to the required length, depending on
the motorised product.
Copyright
2014 - 2017 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
operating and installation guide carefully.
1)
2)
1)
EN
Safety
V
Up
Down
Ø > 47 mm
c
a
b
L1 = ...
L1
2)
3