Spraying
h Spray Controls
There are two main controls that determine the width,
orientation or thickness of the spray pattern.
• Material flow control
• Air cap / pattern adjustment
1
2
Air cap ears
Air cap ears
3
3 - 6 "
(7-15 cm)
English
6
All manuals and user guides at all-guides.com
note: For a video showing Home Décor Sprayer
spraying tips and best practices, visit
www.homedecorsprayer.com.
1. Adjust the material flow by turning the knob on the
rear of the spray gun.
I
Less paint
Tip: With practice, the material flow can also be
controlled by the trigger. The further the trigger pull,
the more material is sprayed and vice versa.
=
=
2. Adjust the spray pattern by turning the air cap ears.
C
=
=
D
Up / down motion
=
=
4-6" wide pattern
For spraying large surfaces
(dressers or desktops)
3. Practice your technique (use provided poster).
h Get closer. The spray gun should be 3-6 inches
away from the spray object.
h Full passes. Spray the material in full passes, not
short waves.
h Light coats. For a finer finish, coat lightly during
first pass, then cover completely on second pass.
II
III
IIII
More paint
=
=
=
=
=
=
B
A
Side / side motion
Up/down or side/side
4-6" tall pattern
1-2" pattern diameter
For spraying narrow
surfaces (chair legs or
© Wagner Spray Tech. - All Rights Reserved
=
C
=
B
=
A
D
=
=
=
spindles)