Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 21 Thursday, June 29, 2023 9:24 AM
TROUBLESHOOTING
FAQs
Frequently Asked Questions
Q:
What are the best temperature settings for my refrigerator?
A:
The default temperature for all compartments is 55 °F (13 °C). For long-term storage of wine, keep the
compartment at a constant temperature between 53 °F to 57 °F (12 °C to 14 °C). If serving wine within
a few weeks, you may store it at its serving temperature instead. See the Storing Wine section for
more information. Check the label or consult a wine guide for recommended serving temperatures
for specific wines. To switch the display from Fahrenheit (°F) to Celsius (°C), press the Upper button
first to wake the display then press and hold the Upper and Light buttons until you hear a beep and
the settings in the display change.
Q:
How do I set the refrigerator temperature?
A:
The temperature of each zone can be set separately. Continually press the Upper, Middle or Lower
button on the control panel until the desired temperature appears. The numbers will cycle from
highest to lowest and then return to the highest again with continuous pressing.
Q:
My refrigerator is powered on and the controls are working, but it's not cooling and the display
shows "OF" (see below). What is wrong?
A:
The refrigerator is in Display Mode. This mode disables cooling to save energy while the appliance is
on display in a store. To restore normal operation, press Upper, Middle or Lower button first to wake
the display then press and hold the Upper and Humidity buttons until you hear a beep and the
temperature setting appears on the display. Use the same procedure to return the refrigerator to
Display Mode, if desired.
Before Calling for Service
Cooling
Problem
Refrigerator is not
The refrigerator control is set to OFF (some models).
cooling or has no
• Turn the control ON. Refer to the Storing Wine section for proper temperature settings.
power.
Refrigerator is set to Display Mode.
• Display Mode allows the lights and control display to work normally while disabling
Refrigerator was recently installed.
• It may take up to 24 hours for each compartment to reach the desired temperature.
Refrigerator was recently relocated.
• If the refrigerator was stored for a long period of time or moved on its side, it is necessary
Cooling system runs
Refrigerator is replacing an older model.
too much.
• Modern refrigerators require more operating time but use less energy due to more
cooling, to save energy while the refrigerator is on the showroom floor. See the FAQs
section of this manual for instructions on how to disable Display Mode.
for the refrigerator to stand upright for 24 hours before connecting it to power.
efficient technology.
TROUBLESHOOTING
Possible Cause & Solution
21
Publicité
