Panasonic AJ-CA905G Mode D'emploi page 9

Attaching the battery pack
NP-1 type battery pack
1
Remove the battery holder.
2
Attach the NP-1 connector provided as an
accessory.
Connect here.
Battery holder
NP-1 connector
Connector mounting
screws (4 mm)
3
Attach the NP-1 type battery case to the unit.
1 Tighten the case mounting screws (8 mm).
2 Tighten the power contact screws.
3 Insert the top of the detached cover in the
direction shown by the arrows.
4 Align the holes in the bottom of the cover (metal
part) with the holes at the bottom of the case,
and use the screws to attach the case.
<Note>
When mounting the battery case, take care not to
pinch the connecting cord.
1
3
2
4
9 (E)