Publicité
Les langues disponibles
Les langues disponibles
Instruction manual
PARTS DESCRIPTION
1. Thermostat
2. Water filling mouth
3. Steam switch
4. Spraying nozzle
5. Movable wire
6. Spray button
7. Control light
8. Soleplate
9. Water tank
6
3
2
4
9
8
4
5
7
1
OPERATION AND MAINTENANCE
•
Remove all packaging of the device.
•
Check if the voltage of the appliance corresponds to the main voltage
of your home. Rated voltage : AC220-240V 50Hz.
•
Filling your iron with water
•
Before filling water, please pull out the wall outlet and turn the thermostat
to the "min" position. Fill with cold tap water to maximum level, please be
aware not to overfill.
•
Never add other liquids to the water!
•
The radius of the exhaust steam is very powerful, so make sure you do
not focus on people, pets or delicate points. 1
The use of your iron without steam
•
Turn the steam switch to the O position (No.1)
•
Set the switch on the iron to the desired position From MIN to MAX.
•
On the label in your garment you can find the correct position which
is appropiate for the garment. See the schedule for the meaning of the
standings.
•
The control light turns off if the desired temperature is reached. 4
•
To remove stubborn wrinkles, you can press the spray button to
•
bring your ironing to moisten. Turn the spray button right to spray.
The use of your iron with steam
•
Turn the steam switch to position 2 or position 4 for more steam.
•
Set the thermostat on the iron to the desired position of MIN to MAX.
•
On the label in your garment, you can find the correct position which
is appropiate for the garment. See the scedule for the meaning of the
standings.
•
The control light turns off if the desired temperature is reached.
Publicité
