Simplicity SNAPPER LT75 Manuel De L'opérateur page 29

Maintenance
Lubrication
Lubricate the unit at the locations shown in F F igures 30
to 32 as well as the lubrication points listed.
• Generally, all moving metal parts should be oiled
where contact is made with other parts.
• Keep oil and grease off belts and pulleys.
• Wipe surfaces clean before and after lubrication.
NOTE: Use grease fittings when present. Automo-
tive lithium grease is recommended.
Figure 31. Mower Deck Lubrication Points
All manuals and user guides at all-guides.com
Models with grease fittings:
Lubricate with grease gun.
Apply grease with a brush
to areas shown.
Lubricate the areas shown
with engine oil.
Figure 30. Tractor Lubrication Points
Figure 32. Arbor Lubrication Points
en
29