Simplicity SNAPPER LT75 Manuel De L'opérateur page 18

Operation
Empty the Grass Bagger
1. Extend the grass bagger handle and rotate forward
until the grass bagger assembly is completely
open at the bottom (see F F igure 17).
2. Empty the grass from the bagger.
3. Rotate the grass bagger assembly back to the
closed position for mowing.
18
All manuals and user guides at all-guides.com
Figure 16
Figure 17
Stop the Unit
1. Completely push the clutch/brake pedal forward to
stop the unit (see F F igure 13). Keep your foot on the
pedal.
2. Push the blade rotation control down to the
DISENGAGE position (see F F igure 9).
3. Release the speed control pedal to the NEUTRAL
position (see F F igure 14).
4. Set the parking brake (see F F igure 15).
WARNING
Make sure the parking brake will hold the unit.
5. Move the throttle control to the SLOW position
(see F F igure 8).
6. Turn the ignition key to the OFF position to stop the
engine (see F F igure 18).
en
Figure 18