Key Functions - Benning PV 3 Mode D'emploi Abrégé

5.1 Einschalten/Ausschalten
+

5.2 Key functions

Key
+
+
5.3 Coupling with BENNING SUN 2 (optional accessories)
OFF
+
+
01/ 2019
Press and hold the buttons 2 and 3 for 2 seconds to switch the
BENNING PV 3 on or off.
Press once
Store:
stores the measuring results,
next storage location in recall
mode
Recall:
calls measured values,
previous storage location in recall
mode
Starts measurement
Remove other electronic devices in direct vicinity.
Switch off the BENNING PV 3 and the BENNING SUN 2.
Press and hold both keys of the BENNING SUN 2.
Simultaneously press and hold both keys 2 and 3 of the
BENNING PV 3.
The BENNING SUN 2 sends a coupling signal with the individual
serial number of the device.
The BENNING PV 3 stores the signal for future radio connection
and signals successful coupling via an acoustic signal and by
showing "connected" on the display.
The coupling process only takes a few seconds.
The "W/m " symbol is shown on the LC display 1 of the
2
BENNING PV 3.
BENNING PV 3
Press + hold
Switches the device ON/OFF
Completely deletes the
measured value memory
Sends measured value
memory to USB port

10