Benning PV 3 Mode D'emploi Abrégé page 10

Use the BENNING PV 3 only in compliance with the intended use specified in this docu-

mentation. If the BENNING PV 3 is used in a manner not specified by this document then
the protection provided by the equipment may be impaired.
 Use the BENNING PV 3 under dry ambient conditions only.
Before opening the battery compartment, all measuring leads must be removed!

Electrical danger!
Before commissioning, the battery compartment must be properly closed.
Do not use pointed objects to remove the rechargeable batteries from the BENNING PV 3.

Damaged batteries can leak and increase the risk of fire!
Before the first use and before each use, fully charge the rechargeable batteries. Only
use rechargeable 3.7 V 18650 lithium-ion batteries (accumulators, protected version).

Unprotected 18650 lithium-ion batteries increase the risk of leakage and damage to the
BENNING PV 3.
3. Scope of delivery
The scope of delivery for the BENNING PV 3 comprises:
3.1 One BENNING PV 3,
3.2 Two measuring leads with probe tip (L = 1.2 m) (red/ black)
with two crocodile clips (red/ black) (P.no. 10208356)
3.3 Two PV measuring leads for MC4 connector (L = 2.0 m) (red/ black) (P.no. 10208355)
3.4 Three rechargeable 3.7 V 18650 lithium-ion batteries (accumulators, protected version), (P.no.
10208358)
3.5 One charger (P.no. 10208360)
3.6 One USB connecting cable (A plug to B plug) (P.no. 10008312)
3.7 One short instructions
3.8 One calibration certificate
3.1
01/ 2019
3.2 3.3
BENNING PV 3
3.4 3.5
3.6

8