Mesto 3558BM Mode D'emploi page 19

EN
+
After Usage
Observe the instructions in the section entitled "Safety".
Never leave liquid in the device.
3. Dilute the remaining quantity twice in a row with 1/2 liter of water each time and spray
the resulting liquid onto the treated area.
Collect and dispose of the residual liquid and the tank according to all applicable
Follow the instructions of the spray product manufacturer!
protected from sunlight and freezing temperatures.
Clean the protective equipment and yourself every time after usage.
Care and maintenance
Observe the instructions in the section entitled "Safety".
ly after the winter break:
1. Grease the diaphragm [24].
2. Oil the pump rod [33].
3. Grease the bearings on the shaft [16].
4. Clean the nozzle [41] and the insert [40] under running water. If required use a brush.
Observe the legal requirements of your country for accident prevention and check
the device in regular intervals.
test every 2 years and an internal test every 5 years as well as a strength test every
10 years.
18
ENGLISH
-