Télécharger Imprimer la page

Tristar FR-9008PR Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Instruction manual
Pressing and holding the power button for 5 seconds will bring the
appliance in standby mode.
Using a pre-set cooking program
Pre-sets
Reheat
Bake
Drumsticks
Fish
Steak
Fries
Vegetables
6
Time (minutes)
Temperature
(°C)
06
120
20
160
25
200
20
200
15
180
20
200
15
160
Crustaceans
To use a pre-set program, press the Menu button [M] repeatedly
until the icon of the desired pre-set cooking program flashes.
The cooking time and temperature of the pre-set programs can be
adjusted by pressing the Program button [P] until the time or
temperature flashes then using the + and – buttons.
Press the power button to start the operation.
Shaking
Note: For crispier results it is recommended to shake the fryer basket
1-2 times throughout the cooking cycle.
To shake the ingredients, pull the basket out of the appliance by
the handle and shake it around, then slide it back into the Air
fryer.
Do not touch the basket during and for some time after use, as it
gets very hot. Only hold the basket by the handle.
When the set preparation time has elapsed, the appliance will
beep 5 times. Pull the basket out of the appliance and place it on
a heat-resistant surface.
Check if the ingredients are ready. If the ingredients are not ready
yet, simply slide the basket back into the appliance and set the
timer to a few extra minutes.
Empty the basket into a bowl or onto a plate. When a batch of
ingredients is ready, the Air fryer is instantly ready for preparing
another batch.
20
160

Publicité

loading