Télécharger Imprimer la page

Tristar FR-9008PR Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Separate collection / Check your local municipal guidelines.
PARTS DESCRIPTION
1. Air inlet
2. Air outlet
3. Menu button [M]
4. Program button [P]
5. Display
6. Plus button +
7. Minus button –
8. Power button
9. Basket
10. Handle
11. Grill rack
BEFORE THE FIRST USE
Remove all packaging material.
Remove any stickers or labels from the appliance.
Thoroughly clean the basket with hot water, some washing-up
liquid and a non-abrasive sponge.
Wipe the inside and outside of the appliance with a moist cloth.
Place the appliance on a stable, horizontal and level surface, do
not place the appliance on non-heat-resistant surfaces.
This is an Air Fryer that works on hot air. Do not fill the
basket with oil or frying fat.
In order to prevent disruptions of the airflow do not put
anything on top of the appliance and make sure there is
always 10 centimetres of free space around the appliance.
USE
Put the mains plug in an earthed wall socket.
The appliance will enter stand-by mode.
Carefully pull the basket out of the Air fryer.
Place the grill rack into the frying basket.
Put the ingredients in the basket.
Slide the basket back into the Air fryer.
Press the power button to activate the display.
The default time (15minutes) and temperature (180°C) and the
cooking pre-sets will be shown in the display. If you wish to use
these settings press the power button again to start the
operation.
Manual programming
The default temperature can be adjusted between 0°C - 200°C.
To adjust the temperature, press the Program button [P] until the
temperature flashes in the display then use the + and – buttons to
increase or decrease the temperature.
The default cooking time can be adjusted between 1- 60 minutes.
To adjust the cooking time, press the Program button [P] until the
time flashes in the display then use the + and – buttons to
increase or decrease the cooking time.
Press the power button to start the operation.
To cancel an operation, press the power button again.
Instruction manual
EN
5

Publicité

loading