2 Safety notes
2.1 Correct use
Safety in operation is only guaranteed if the ball
valve connector block is used correctly.
The ball valve connector block allows the easy
connection of the dwelling station "Regudis W" to
the pipework. Any use of the control station
outside the above applications will be considered
as non-compliant and misuse. Claims of any kind
against the manufacturer and/or his authorised
representatives due to damages caused by
incorrect use cannot be accepted.
The observance of the installation and operating
instructions is part of the compliance terms.
2.2 Possible dangers at the installation loca-
tion and during transport
The case of an external fire has not been taken
into consideration when constructing the ball valve
connector block.
WARNING
Hot and cold surfaces
Risk of injury Only touch with safety gloves.
The ball valve connector block can get very hot
during operation.
Sharp edges
Risk of injury Only touch with safety gloves.
Threads, bore holes and edges are sharp.
Small components
Risk of ingestion Store and install control sta-
tion out of reach of children.
Allergies
Health hazard Do not touch the ball valve con-
nector block and avoid any contact if allergies
against the used materials are known.
3 Transport, storage and
packaging
3.1 Transport inspection
Upon receipt check delivery for any damages cau-
sed during transit.
Any damage must be reported immediately upon
receipt.
3.2 Storage
The ball valve connection set must only be stored
under the following conditions:
– Do not store in open air, but dry and free from
dust.
– Do not expose to aggressive fluids or heat sour-
ces.
– Protect the control station from direct sunlight
and mechanical agitation.
– Storage temperature: –20°C up to +60°C,
max. relative humidity of air: 95
3.3 Packaging
Packaging material is to be disposed of environ-
mentally friendly.
4 Technical data
4.1 Connection scheme
Dwelling station "Regudis W"
Illustr. 4.1 "Regudis W" connection set
7