Publicité
Les langues disponibles
Les langues disponibles
5.4 Installation "Regudis W-HTF" constant
temperature
Installation of the ball valve connector block
"Regudis W" 1341180
Provide for a peripheral distance of 100 mm
towards any obstruction.
Illustr. 5.4 Connection scheme ball valve connector
block 1341180
Bore holes:
A – Installation point ball valve connector block
B – Installation point dwelling station "Regudis W"
Distance to wall – centre ball valve: 26.5 mm
10
5.5 Installation "Regudis W-HTF"
variable temperature
Installation of the ball valve connector block
"Regudis W" 1341180
Provide for a peripheral distance of 100 mm
towards any obstruction.
Illustr. 5.5 Connection scheme ball valve connector
block 1341180
Bore holes:
A – Installation point ball valve connector block
B – Installation point dwelling station "Regudis W"
Distance to wall – centre ball valve: 26.5 mm
When installing the ball valve connector block in a
flush-mounted cabinet, the prefabricated fixing
points must be used.
6 Operation
Before putting the installation into operation, the
system has to be filled and bled with due conside-
ration of the permissible operating pressures.
7 Maintenance
The ball valve connector block is maintenance-
free.
8 General terms and conditions
of sales and delivery
Oventrops general terms and conditions of sales
and delivery valid at the time of supply are
applicable.
Publicité
