Burkert 8137 Manuel D'instructions page 25

All manuals and user guides at all-guides.com
Function/Configuration
Mount/Dismount indicat-
ing and adjustment
module
LEVEL TRANSMITTER 8137 • 4 ... 20 mA/HART
6 Set up with the indicating and adjustment module
6 Set up with the indicating and adjustment
module
6.1 Short description
The indicating and adjustment module is used for measured value
indication, adjustment and diagnoses. It can be used in all sensors of
the LEVEL TRANSMITTER family.
From a hardware version ...- 01 or higher of the indicating and
adjustment module, i.e. the corresponding sensor electronics, an
integrated backlight can be switched on via the adjustment menu. The
hardware version is stated on the type label of the indicating and
adjustment module or the sensor electronics.
Note:
You can find detailed information on adjustment in the operating
instructions manual "Indicating and adjustment module".
6.2 Insert indicating and adjustment module
The indicating and adjustment module can be inserted into the sensor
and removed again at any time. It is not necessary to interrupt the
power supply.
For mounting, proceed as follows:
1
Unscrew the housing cover
2
Place the indicating and adjustment module in the desired position
on the electronics (you can choose any one of four different
positions - each displaced by 90°)
3
Press the indicating and adjustment module onto the electronics
and turn it to the right until it snaps in.
4
Screw housing cover with inspection window tightly back on
Removal is carried out in reverse order.
The indicating and adjustment module is powered by the sensor, an
additional connection is not necessary.
25