Burkert 8137 Manuel D'instructions page 15

All manuals and user guides at all-guides.com
Inflowing medium
LEVEL TRANSMITTER 8137 • 4 ... 20 mA/HART
1
> 200 mm
Fig. 6: Mounting on round vessel tops
Reference plane
1
Vessel center or symmetry axis
2
In vessels with conical bottom it can be advantageous to mount the
sensor in the center of the vessel, as measurement is then possible
down to the lowest point of the vessel bottom.
Fig. 7: Vessel with conical bottom
Do not mount the instruments in or above the filling stream. Make sure
that you detect the product surface, not the inflowing product.
4 Mounting
2
15