Publicité
Les langues disponibles
Les langues disponibles
en
16
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the adapter and ratchet (figure 3).
For adjustment of the drill spindle, mount
the adapter and the ratchet on the right or
left side.
The drill spindle can also be adjusted from
either side using a T-handle hex wrench or
a hex key. (figure 4)
Fig. 3
2.
1.
4.
Adapter
Fig. 4
1.
3.
3.
1/2"
1.
2.
Ratchet
8 mm
1.
2.
T-handle spanner
Publicité
