Important - Oase BioPress UVC 1000 Notice D'emploi

Pompe de nettoyage mécanique et biologique d'étangs ou de bassins de jardin
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

- English -
Start-up
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the
units and installations (switch off and disconnect from the power supply) before reaching into the water.
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.
!
Attention! Never operate the unit with a water pressure of more than 2.9 psi (0.2 bar)

Important:

Switch the pump on first, then the UVC clarifying unit.
Do not operate the unit without water flowing through.
The unit switches on automatically when power
connection is established.
1. Switching on: Connect power plug to the socket.
○ The Light Indicator is lit.
Note:
○ After a new installation, the unit will reach its full
biological cleaning effect after a few weeks.
○ The full effect on bacteria is only reached as at a
water temperature of 50 °F (+ 10 °C).
○ In the event of overheating, the installed
temperature monitor switches the UVC lamp off
automatically, the lamp automatically switches on
again once cooled down.
○ Check all connections for leaks.
2. Switching off: Disconnect the power plug.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
BioPress 1600 / 2400
1.
BioPress 1000
1.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Biopress uvc 1600Biopress uvc 2400

Table des Matières