Important - Oase 280 Notice D'emploi

- English -
Installation
WARNING
Risk of electric shock – This pump is supplied with a grounding conductor and grounding-type attachment plug. To
reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type
receptacle.

Important:

● Always place the unit below water level.
● It is recommened to place the unit horizontally on the ground ensuring its stable position.
●
Do not lift the pump by its power cord.
1. Attach the adapter to the pump first, then connect tubing
to the adapter.
NOTE: Tubing is NOT INCLUDED.
2. Attach the other end of the tubing to desired water
feature or UV clarifier.
Start-up
Attention! The pump must never run dry.
!
Possible consequences: The pump will be destroyed.
Protective measures: Check the water level at regular intervals. Always place the unit below water level.
! Attention! The installed temperature sensor automatically turns the pump off, if it is overloaded. The pump
automatically switches on again once the motor has cooled down. Risk of accident!
Install the unit so that it is not exposed to direct sun radiation (max. 104 ºF - 40 ºC).
Important:
● The unit switches on automatically when power connection
is established.
1. Switching on: Connect power plug to the socket.
2. Adjust the flow control to the preferred setting.
3. Switching off: Disconnect the power plug.
Tubing
1.
Adapter
1.
2.
+
-
Pump
4