Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOTING
PROBLEM
POSSIBLE CAUSE SOLUTION
Smell of
Regulator or valve
gas
leaking
Flame
Fire in burner tube
flashback
due to blockage.
beneath
control
panel
Gas leak
Improper
detected
installation and
from
loose connections.
cylinder,
Mechanical failure
regulator,
due to rusting or
or other
mishandling.
connection
Grease fire
Grease build up in
or
burner area.
continuous
excessive
flames
above
cooking
surface
Manufactured by: JIANGMEN MINSHENG KITCHEN EQUIPMENT
CO,LTD
BUILDING I, NO. 49, LIDONG 2ND ROAD, LILE, JIANGHAI
DISTRICT, JIANGMEN,GUANGDONG, CHINA
MADE IN CHINA
34
Remove the LP cylinder
immediately and check for
damaged regulator or valve.
Perform leak test, see
Testing Valves and
Regulator for Leaks in the
Assembly section.
See Cleaning Burner
Assembly and Checking
Venturi for Insects in the
Maintenance section.
Tighten fittings and see
Testing Valves and
Regulator for Leaks in the
Assembly section.
Replace the LP gas cylinder.
Turn off control knob. Leave
firebox hood open allowing
flames to extinguish. Once
cool, clean the grill
thoroughly.
Burner will
The LP gas
not light
cylinder is empty.
Burner not
connected to
control knob.
Venturi blocked.
Ignitor wire is
loose, dirty, or not
connected.
Dead battery in
ignitor.
Decreasing
LP gas cylinder is
heat or
empty.
popping
Venturi blocked.
sound
Hot spots
Venturi blocked.
on cooking
surface
Yellow
Venturi or burner
flame
may be blocked.
Inside of
This is a build up
firebox
of grease.
hood
appears to
be peeling
Replace the LP gas
cylinder.
Make sure valves are inside
the burner tubes.
See Testing Valves and
Regulator for Leaks in the
Assembly section.
Reconnect burner electrode
wires or replace the ignitor
wire assembly.
Clean wires and/or
electrode with rubbing
alcohol and a clean swab.
Tighten all connections.
Replace the battery in the
ignitor.
Replace the LP gas
cylinder.
See Cleaning Burner
Assembly and Checking
Venturi for Insects in the
Maintenance section
See Cleaning Burner
Assembly and Checking
Venturi for Insects in the
Maintenance section
See Cleaning Burner
Assembly and Checking
Venturi for Insects in the
Maintenance section
Clean with a soft bristle
brush or scraper.
35
Publicité
