Publicité
Les langues disponibles
Les langues disponibles
Step 4: Attaching Firebox Handle
See Figures 11-12.
1.Raise and open the stand.
2.Lift the hood latch, then raise the firebox hood.
3.Remove the wing nuts from the studs in the firebox handle.
4.Insert studs in firebox handle through holes in the firebox hood.
5.Install the wing nuts and tighten securely.
Step 5: Installing the Grease Cup
See Figure 13.
1.Slide the grease cup into the cup holders on the bottom of the grill.
NOTE: Clean the grease cup after each use. Do not remove the
grease cup until after the grill has cooled completely. Do not
transport the grill with a dirty grease cup.
Firebox
Figure 11
18
Hood Latch
Firebox Hood
Firebox Handle
Wing Nut
Figure 12
Figure 13
Grease Cup
Firebox Hood
19
Publicité
