Publicité
Les langues disponibles
Les langues disponibles
Cooking grates:
▪
Clean before and after each use with a stiff wire brush.
Port shields:
▪
Scrape any build-up off the port shields using a wire brush.
Grease:
▪
After use, allow the grease in the cup to cool, then empty into
the garbage.
▪
Empty after each use to avoid spillage and flare ups.
Cleaning Burner Assembly and Checking Venturi for Insects
See Figures 21-22.
DANGER:
Failure to clean the burner assembly and check the venturi as
described can result in a fire or explosion resulting in serious injury
or death.
Burner should be cleaned when the grill has been idle for some
time. In some parts of the country, spiders and other insects can
spin webs, build nests, and lay eggs in the venturi blocking gas flow
and causing fire in the tubes known as "flashback". Flashback can
damage the grill and even cause injury.
▪
Turn control knob to OFF(O). Allow the grill to cool completely.
NOTE: To lock the control knob in the off position, turn the control
knob to LOCK(
).
▪
Remove the LP gas cylinder.
▪
Pull electrode wire from the electric ignitor.
▪
Remove the wing nuts securing the burner to the firebox.
▪
Using work gloves, lift the burner up and away from the gas
valve openings.
30
Port Shield
Burner
Firebox
Electrode
Wing Nut
Figure 21
Clean burner tubes using one of the following three
ways:
1.Bend a stiff wire into a small hook. Run the hook through the
burner tube several times.
2. Use a narrow bottle brush with flexible handle and run through
burner tubes several times. Do Not use a wire brush.
3. Wear eye protection, then use an air hose to force air into the
burner tube and out through the burner port. Clean any clogged port
with an opened paper clip.
Gas Valve
Orifice
31
Publicité
