10
Apply the grease evenly.
GRINDER MAINTENANCE
After approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in
peak condition.
WARNING!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if it happens remove it before restarting the machine. Protect the grinder hole with a cloth to avoid
this problem. The snap is signalled by a message on the coffee bean hopper; refer to these messages when
this adjustment is performed.
EMPTY THE COFFEE BEAN HOPPER.
1
program-
show icon
my custom
ming
explanation
coffee
menu
Press and dispense two coffees.
4
Unscrew the screw that holds the
service door closed.
Then reposition the door and attach it with the previously removed screw.
All manuals and user guides at all-guides.com
11
Insert the washed and dried Brew
Group. DO NOT PRESS THE
"PUSH" BUTTON.
2
add coffee
beans
When the following display appears,
press "ok" and repeat the
operations from point (1) just once.
5
Remove screws and service door.
12
Insert the coffee grounds drawer.
Close the service door.
3
ok
Repeat the cycle, turn off the
machine and unplug it.
6
Adjust until it clicks.
43