Saeco Primea Touch Cappuccino Mode D'emploi page 23

20 PROGRAMMING THE MACHINE
«WATER HARDNESS» MENU - INTENZA AROMA SYSTEM
With the "Water hardness" function you can adjust your machine and the Intenza water fi lter to the level of hardness
of the water you use, so that the machine will request descaling at the right moment.
The water hardness in the Intenza water fi lter is expressed on a scale from A to C.
The water hardness in the machine is expressed on a scale from 1 to 4.
1
Immerse the water hardness strip included in
the welcome pack for one second in water.
Press the "water hardness" button.
water
hardness
"RINSE" MENU
To clean the internal circuits for coffee brewing in order to guarantee that beverages are brewed with fresh water
only.
rinsing
deactivate the rinse cycle.
All manuals and user guides at all-guides.com
2
1
Check the water hardness level obtained from the test.
The measurement can be used to set the Intenza Aroma
System correctly (see page 7). Matching parameters are
described on the upper part.
water
hardness
restore
save
go back default
settings
settings
In this menu you can:
rinsing
off
restore
save
go back default
settings
settings
Intenza Aroma System
B
A
2 3 4
Machine water hardness setting
The test can be used only for
one measurement.
Set the water hardness on the
machine by pressing + or -
back to
menu
Note: This rinse cycle is
performed every time the
machine is turned on when it
is cool.
activate the rinse cycle.
on
back to
menu
C