Saeco Primea Touch Cappuccino Mode D'emploi page 10

INTENZA WATER FILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, go to the water fi lter initialization program
(see programming). In this way, the machine informs the user when the water fi lter must be replaced.
Remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards)
in cold water and gently press its sides so as to let the air bubbles out.
1
Remove the small white fi lter
from the tank and store it in a dry
place sheltered from dust.
4
Fill the tank with fresh drinking
water and reinsert it into the
machine.
7
machine beverage
settings settings
main
specials extras
menu
main- clock
tenance settings
back to
energy
coffee
saving
menu
Press "machine settings".
The machine performs the water fi lter initialization. Wait until the cycle stops automatically.
At the end of the initialization cycle, the machine returns to the product selection menu. Do not use the water
dispensed during this phase.
NOTE: if the Intenza water fi lter is not available, insert the small white fi lter previously removed (see
point 1) into the tank.
All manuals and user guides at all-guides.com
2
Set the Intenza Aroma System:
A = Light water
B = Medium water (standard)
C = Hard water
For further details see page 20
5
Place a container beneath the
hot water spout.
8
cup
language
illumination
machine
display
settings
alerts &
cup
acoustic
warmer
settings
restore
go back default
settings
Press "water fi lter".
3
Insert the fi lter in its place within
the empty tank (see fi gure).
Press down until it clicks into
place.
6
show icon
explanation
Press "programming menu".
9
water
fi lter
water
hardness
not
rinsing
inserted
restore
back to
go back default
menu
settings
Press "water fi lter activation".
7
program-
my custom
ming
coffee
menu
water fi lter
activation
water
fi lter
inserted
save back to
settings menu