Saeco Primea Touch Cappuccino Mode D'emploi page 36

In order to run a descaling cycle before the machine indicates the necessity to do so, press the button "descaling
cycle" and then "start descaling" to start the descaling cycle.
descaling start
cycle descaling
2
descaling cycle
please wait
insert the water tank
with fresh water
When the solution is fi nished the
following message appears on the
display:
5
descaling cycle
please wait
rinsing...
pause
rinsing
The machine performs the rinse cycle.
At the end of the rinse cycle fi ll the
tank with fresh drinking water. Before
fi lling the tank reinsert, if desired, the
water fi lter again, or reinsert the small
white fi lter (see page 7).
All manuals and user guides at all-guides.com
1
descaling cycle
please wait
descaling...
pause
descaling
The machine begins to dispense the descaling solution through the hot
water spout. The dispensing occurs at preestablished intervals, in order to
allow the solution to be more effective.
3
Remove the water tank and rinse
with fresh drinking water to
eliminate traces of descaling
solution.
Then, refi ll with fresh drinking
water and reinsert water tank.
6
Put a container under the water spout. When the water
tank is inserted the machine automatically proceeds to
prime the water circuit. If this operation is not successful,
consult "manually priming the circuit" (see page 6)
4
descaling cycle
please wait
rinsing
ciclo di risciacquo
cycle
start
rinsing
Rinse the machine circuits by
pressing "start rinsing".
33