Publicité
LED Color
Blink Rate
Blue/White
Hz
Red
Solid
Red
1Hz
Red
2Hz
Red
4Hz
N/A
N/A
For these blinking combinations the H2 or M2 trainer must have firmware v31.31 or newer
60
Meaning
NT+ FE-C controlling. Bluetooth device connected
(as power meter) but not controlling.
Microprocessor is being updated
Microprocessor update failed
Microprocessor has failed
Radio communication error
Radio Temperature Limit Reached
Coil Temperature Limit Reached
Unplugged or sleeping
1Hz = 1 blink/second
2Hz = 2 blinks/second
How to resolve problem or other details
Combination of two states listed above.
Wait for update to finish
Retry firmware update
Contact customer service.
Contact customer service.
Should not occur under most normal operating
conditions. However, you can try allowing the
trainer to cool off. When the temperature drops
below the threshold the LED will return to normal.
Should not occur under most normal operating
conditions. However, you can try allowing the
trainer to cool off. The trainer will need to be power
cycled in order to recover.
If plugged in, start pedaling to wake trainer up.
4Hz = 4 blinks/second
Publicité
