bort medical 215 150 Mode D'emploi page 9

– do not make any changes to the product
– do not wear it on open wounds
– do not use in case of intolerance of one of the materials used
– no re-use. This medical aid is intended for treating one patient only
– whilst wearing the brace, please neither use any creams nor ointments in
the vicinity of the attached aid as they can destroy the material
Fitting instructions
Before putting on, bend the aluminium splint to the desired shape.
1
Open the lacing before putting the brace on.
2
Pull the brace over the hand up to the lower arm.
3
Adjust the lacing to the desired width.
4
Close the brace by placing the Velcro fastener on the intended surface
in the wrist region.
Removal
Open the Velcro fastener and pull the brace off over the fingers. Close the
Velcro fastener in order to avoid early wear to the Velcro surface.
Material composition
Polyamide (PA), polyester (PES), polyurethane (PUR), elastane (EL), cotton (CO)
The sewn in textile label provides the precise material composition.
EN
09