Wohler MR 400 Mode D'emploi page 39

5.3 Deactivating the temperature compensation
Fig. 18: Display temperature compensa-
tion activated
6 Preparation for measurement
6.1 Connection of the tem-
perature clamps
Fig. 19: Connection of the temperature
clamps
6.2 Pressure zeroing
Fig. 20: Measuring display
The Wöhler MR 400 performs the pressure test
temperature compensated. If required, the temper-
ature compensation can be deactivated as follows:
In the settings menu, briefly press the Mode
•
button three times to enter the "Temperature
compensation" settings menu.
Press one of the arrow keys to deactivate
•
(Hold OFF) or activate (Hold ON) the automatic
switch-off.
The default setting is 15 minutes.
•
Press one of the arrow keys to switch between
•
the different options.
Fold back the covers on the top of the unit and
•
insert the temperature plugs into the corre-
sponding sockets.
• Switch on the unit.
After 4 s, the measuring display appears in the dis-
play.
Preparation for measurement
EN
39