Wohler MR 400 Mode D'emploi page 38

Device settings
5 Device settings
Fig. 17: Display unit settings
5.1 Converting the units
5.1.1 Temperature units
Arrow keys
5.1.2 Pressure units
5.2 Automatic switch off
38
To enter or exit the settings menu, press and
•
hold the Mode button.
It does not matter which menu you are in.
SET appears at the top centre of the display.
NOTE!
If no button is pressed for 10 seconds in the set-
tings menu, the unit automatically switches back to
the previous menu.
In the settings menu, briefly press one of the
•
arrow keys to switch between the units °C and
°F
To save the setting and exit the settings menu,
•
press and hold the Mode button.
To access the pressure units, briefly press the
•
Mode button in the settings menu.
Briefly press one of the arrow keys to switch
•
between the units kPa, mPa, bar, psi and kg/m
.
2
To save the setting and exit the settings menu,
•
press and hold the Mode button.
In the settings menu, briefly press the Mode
•
button twice to enter the "Automatic switch-off"
settings menu.
Here you have the option of deactivating or activat-
ing the automatic switch-off after 5, 10, 15 ,30 or
60 minutes.
The default setting is 15 minutes.
Press one of the arrow keys to switch between
•
the different options.