Briggs & Stratton Brute BTPD22725 Manuel D'utilisation page 14

Maintenance
Maintenance Chart
!
WARNING
DO NOT attempt any maintenance, adjustments or service
with engine and blade running. STOP engine and blade.
Remove the starter insert. Disconnect spark plug wire and
secure away from spark plug. Engine and components are
HOT. Avoid serious burns, allow sufficient time for all com-
ponents to cool. Wear heavy leather gloves when handling
or working around cutting blades. Blades are extremely
sharp and can cause severe injury.
MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off mower
Every 25 Hours or Annually *
Check mower for loose hardware
See Dealer Annually to
Lubricate mower
Check mower blade **
Check mower blade stopping time
Check drive belt
Clean battery and cables
* Whichever comes first
**Check blade more often in regions with sandy soils
or high dust conditions.
14
All manuals and user guides at all-guides.com
Emissions Control
!
Maintenance, replacement, or repair of the emissions
control devices and systems may be performed by any
non-road engine repair establishment or individual.
However, to obtain "no charge" emissions control ser-
vice, the work must be performed by a factory autho-
rized dealer. See the Emissions Warranty.
ENGINE
First 5 Hours
Every 8 Hours or Daily
Every 25 Hours or Annually *
Every 50 Hours or Annually *
Annually
See Dealer Annually to
* Whichever comes first
**Clean more often in dusty conditions or when
Change engine oil
Check engine oil level
Clean engine air filter and pre-cleaner (if equipped)
**
Change engine oil
Replace oil filter (if equipped)
Replace air filter
Replace pre-cleaner (if equipped)
Inspect muffler and spark arrester (if equipped)
Replace spark plug
Replace fuel filter (if equipped)
Clean engine air cooling system
airborne debris is present.
www.brutepower.com