GB
Pre start-up inspection
1. Thoroughly inspect the compactor for signs of damage. Check components are present and secure. Pay special attention to the
belt guard.
2. Check the engine oil and hydraulic oil level and top up as necessary.
3. Check the engine fuel level and top up as necessary.
GB
Honda GX200 Petrol Engine
Stopping the Engine
•
Turn the fuel OFF
Starting the Engine
1. Open the fuel tap by moving the fuel ON / OFF lever fully to the right.
2.
3. Set the throttle to the idle position by moving the throttle lever fully to the right.
4.
5.
6.
7.
right.
8.
Pre-Start Checks
Start And Stop Procedure
ON by moving the choke lever fully to the left. If
OFF position by moving it to the
20
-
Fig.1
Fig.2