bora PC 32-000 Instructions De Montage Et De Service page 53

Troubleshooting
What to do, if ...
... the control unit indicates that the respective cooking zone is on, but the
cooking zone remains cold
Possible cause
■ The 12-pin adapter is not or
not properly connected to the
socket in the control unit.
... there are unpleasant smells when the cooking zone is used for the first
time after commissioning
Possible cause
■ This is normal for brand-new
appliances.
... the appliance fails to work and all indicators remain off
Possible cause
■ Fuse or automatic circuit
breaker of your apartment or
house installation is defective
or has been triggered.
■ The fuse or the automatic
circuit breaker is repeatedly
triggered.
■ Power failure.
... the residual heat indicator is not lit while the heating body is hot
Possible cause
■ The residual heat indicator or
the switching contact in the
heating body is defective.
All manuals and user guides at all-guides.com
Remedy
► Fully plug in the 12-pin adapter.
Remedy
► Ventilate the room.
► The smell will disappear after a few hours of
Remedy
► Change fuse.
► Reset automatic circuit breaker.
► Call BORA Lüftungstechnik GmbH.
► Check power supply.
Remedy
► Call BORA Lüftungstechnik GmbH.
operation of the cooktop.
25