bora PC 32-000 Instructions De Montage Et De Service page 41

... Installation
► Mount the toggles. Ensure that dimension 18,5 mm is maintained when the
knobs are in "0" position.
► If the two toggles are not at the same distance from the power
control sleeves, adjust the distance with the adjusting screw in
the toggle shaft, using the enclosed Allen wrench. Both toggles
must be at a distance of 18,5 mm from the respective sleeve
(see above diagram).
After installation, connect the cooktop to the control unit. Plug the 12-pin adapter
of the cooktop into the respective socket of the control unit.
All manuals and user guides at all-guides.com
Cover
Toggle
Power control
sleeve
Allen
wrench
13