bora PC 32-000 Instructions De Montage Et De Service page 38

... Installation
Flush installation of cooktop
► Place the cooktop in the cut-out. Seal
the gap between the cooktop and the
hob with a temperature-resistant silicone
adhesive. Remove
adhesive with a putty knife.
Installation of the cooktop in the worktop cut-out
► Place the cooktop in the cut-out and secure it with the clamps.
The BORA logo must be positioned in the rear right corner of the built-in cooktops.
10
All manuals and user guides at all-guides.com
excess
temperature-resistant
silicone adhesive
silicone