Benthaus Opal Manuel De L'utilisateur page 37

5 minutes
Modules (power management)
Operation
4.23 Locking
The lock can be used to lock key operation and cooking
level settings. Only the ON/OFF key can be used to
switch the hob off .
Activating the lock
1. Press the lock key
brightly.
The lock will now be activated.
Switching off the lock
2. Press the lock key
dimmed light.
The lock is now switched off .
Notes
An activated lock will remain activated even if the hob
is switched off . It must therefore be de-activated when
cooking is re-commenced.
The activated lock will be cancelled, i.e. de-activated, in
the event of a power failure and when the ON/OFF key is
used for switching off .
4.24 Power boost
The power boost setting makes additional power
available for induction cooking zones. A large quantity of
water can be brought to the boil very quickly.
1. Switch on the hob. Use the cooking level display (as a
key) to select a cooking zone. The stand-by dot of the
cooking zone selected will light up.
2. Press the
power boost setting will be activated.
3. After 5 minutes the power boost setting will switch off
automatically. The
will switch down to 9.
Please note
Press the sensor fi eld to prematurely de-activate the
power boost.
4.25 Power management
For technical reasons two cooking zones always
comprise a module and have a maximum power level.
If this power range is exceeded when a higher power
setting level or the power boost function is switched on
the power management system will reduce the power
setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink,
after which the highest-possible power setting will be
consistently displayed.
. The lock key will light up
. The lock key will light up with a
sensor fi eld on the far right. The
will go off and the cooking level
ENG
37