Benthaus Opal Manuel De L'utilisateur page 33

Operation
4.15 Stop function
The cooking process can be briefl y interrupted with the
STOP function, e.g. if the doorbell rings. The STOP
function must be released in order to continue cooking
at the same cooking level. If a timer has been set it will
pause and will then continue.
This function is only available for 10 minutes for reasons
of safety. The hob will then be switched off .
1. Pots and pans are on the cooking zones and the
required cooking levels have been set.
2. Press the Stop key
levels, the interval sign
3. The interruption is ended by fi rstly pressing the STOP
key and then pressing any other key (except the
ON/OFF key).
The second key must be pressed within 10 seconds
as the hob will otherwise be switched off .
4.16 Recall function
(recovery function)
The most recent setting can be recovered if the hob is
switched off unintentionally.
The recall function only works if at least one cooking
zone is switched on.
1. The hob is inadvertently turned off by the ON/OFF key
of the hob
2. Within 6 seconds after turning it off , press the ON/
OFF key of the hob
The STOP key blinks.
The STOP key
afterwards.
The original cooking levels are restored. The cooking
process continues.
What can be restored:
• Cooking levels of all cooking zones
• Minutes and seconds of programmed timer functions
• Automatic boost function
• Power boost
Not to be restored:
• Operation time limit (it is counted from 0)
. Instead of the selected cooking
will light up.
.
again.
must be pressed immediately
ENG
33