Benthaus Opal Manuel De L'utilisateur page 34

approx. 3 sec.
34
approx. 3 sec.
Operation
4.17 Childproof lock
The childproof lock serves the purpose of preventing
children from switching on the induction hob either
accidentally or intentionally. The controls are blocked here.
Switching on the childproof lock
1. Press the ON/OFF key of the hob (1 s.) until the cooking
level 0 appears.
2. Immediately afterwards press the cooking level display
and keep it pressed (for approx. 3 seconds) until the
sensor fi eld lights up from 0-P.
3. Immediately afterwards slide over the complete sensor
fi eld from 0-P to activate the the childproof lock. The
power setting indicators will show an L for child lock, the
controls will be disabled and the hob will switch off .
Switching off the childproof lock
4. Press the ON/OFF key.
5. Immediately afterwards press the cooking level display
and keep it pressed (for approx. 3 seconds) until the
sensor fi eld lights up from 0-P.
6. Immediately afterwards slide over the complete sensor
fi eld from 0-P to deactivate the the childproof lock. The L
will go off .
Please note
• In the event of a power cut the childproof lock will not be
cancelled.
4.18 Bridging function
zones)
The front and the rear cooking zones may be activated
together for a cooking process (bridging function). This
enables larger cookware to be used.
1. Switch on the hob.
2. Press the two cooking zone selection keys of the front
and back cooking zones simultaneously to activate
the bridging function. The bridging function has been
switched on and the back power level setting shows the
bridge .
Operation is carried out with the front power level setting
and the sensor fi eld.
3. Activate the front and back cooking zones simultaneously
again or switch the hob off to deactivate the two power
level settings (as a key).
Please note
The roaster or the pot will need to cover at least half of the
cooking zones used in order to be recognised by the pan
recognition device!
ENG
(only for Octa cooking