Mitsubishi Heavy Industries SRK63ZK-S Manuel De L'utilisateur page 10

AUTO mode operation
Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status
• The current time and preset
OPERATION MODE are displayed
while the air conditioner is turned
off.
Temperature adjustment during AUTO
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
the button.During automatic operation, 24°C is preset both for heating and cooling.
FAN SPEED
You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
Silent operation
All manuals and user guides at all-guides.com
When the unit is not in AUTO mode:
1
Press MODE button.
Move the [
Point the remote control toward the air-conditioner, and
2
Press the ON/OFF button.
NOTE
• In case air is not blowing out
during the operation.
Page 19
• When the included clean filter is
installed the air conditioner will
clean the air during automatic
operation.
When a change in temperature is required.
1
Press the
When it is a little cold
Press the button.
Each time the
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
change.
When it is a little hot
Press the button.
Each time the
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
-6
temp.(°C) 18
Press the FAN SPEED button.
Move the [
FAN SPEED
AUTO
HI
MED
• When changing FAN SPEED from HI to LO, the sound
LO
ULO
– 8 –
mark] to the (Auto) position.
To stop: Press the ON/OFF button.
AUTO mode can be
operated by simply
pressing the ON/
OFF button.
• If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
or button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
Remote Control display
+ 0
-5 -4 -3 -2 -1 +1
19 20 21 22 23 24 25
mark] to the preferred fan speed position.
AUTO HI MED LO
NOTE
of refrigerant flowing may be heard.
Page 9
Page 10
button or
+2 +3 +4 +5 +6
26 27 28 29 30
ULO