All manuals and user guides at all-guides.com
CARE AND MAINTENANCE
1. Please wash the machine in case of residue going
bad.
2. Take the hopper away, move the cavity lock buckle
to specify position.(refer to printed guiding
direction on top lid)t .
3. Rotate the cavity to the biggest anger (note: please
don't put finger on the cavity in case of any harm
keep away from the kid..
4. Pull out the cavity parts and pressing shaft,
clean it with soft dry towel..
Note: do not use corrosive scour.
5. Please clean the cavity, lock buckle and
residue in time with attached tool.
6. Please set the pressing shaft first then
cavity, make the cavity buckle lock the
parts refer to the guiding note on the top
lid, rotate the cavity protection cover off.
EN
19