Klarstein Olivia Mode D'emploi page 17

All manuals and user guides at all-guides.com
4. Put the oil box and residue box to the position
as picture. Note:please put hopper and hopper
lid in right position, otherwise it would stop
working.).
5. Switch on power with 220V, press the power button and "pause/start"button .(in
this situation the guiding light turns to sparkling red)
6. It reaches setting temperature (guild lights turn to green if reached the setting
temperature.)in about one minute and starts to squeeze oil. Oil drops into
container directly
Note: It would not start to work if not press "pause/start"button even reaches the setting
temperature.
7. After working 45 minutes continuously or the hopper without material over 1
minute, it will access to protection function and guild light turns slow sparkling red.
Please press power button again to proceed.
(Note: It would automatically stop working if big size material in the hopper. In this
situation please restart the machine , press "pause/start" button and mix the material
with attached tool(please don't put hand or mixing tool into cavity through hopper in
case of any damage on you or machine.). Falls Material im Trichter stecken bleibt, wird
augenblicklich der Schutzmodus aktiviert. Drücken Sie für einige Sekunden die Taste
REVERSE und drücken Sie zum Fortsetzen des Betriebs anschließend die Taste START/
PAUSE.
It would automatically go into protection proceed when got stuck, please press
"reverse" button for seconds, then press"pause/start" button to work again.
Hinweis: Der Ölgehalt von Sojabohnen ist niedriger als 10 %, weshalb deren
Verwendung nicht empfohlen wird.
Hints on production of peanut oilTipp zur Herstellung von Erdnussöl
To make high quality oil and avoid machine getting stuck .please fry the peanuts dry
before pressing .Cause the size, hardness and quality are different in all cities.
General Notes
1. Please choose well-stacked, normal color and high oil content qualified
hygiene standards material .moldy and rotten Material is not allowed to use for
pressing oil.
2. To make sure machine work well and high oil extraction rate, please choose 90%
dryness material,we suggest fry the material with low temperature for half hour or
put in the sun for one hour.
3. Reinigen Sie die Presswelle ausschließlich mit einem trockenen Tuch und nicht mit
EN
17