Télécharger Imprimer la page

Baxtran DSC Serie Manuel D'usager page 15

Publicité

Les langues disponibles

Les langues disponibles

Model DSC
4.
DISPLAYS STATEMENT
DISPLAY SCREEN
1.
Weight screen: for displaying the weight.
2.
Unit weight screen: for displaying the unit weight or the times of accumulation.
3.
Total quantity screen: for displaying the total quantity or the accumulated quantity of the product.
SIGN
1.
Tare: means the scale has deducted tare.
2.
Accumulation: means the scale has the accumulated records.
3. -Hi-, -Lo-
Alarm presetting: means the scale has setted the upper and lower limit.
4.
kg
kg: means current unit is kg.
5.
g
g: means current unit is g.
6.
lb
lb: means current unit is lb.
7.
o: means stable signal.
5. KEYS STATEMENT
KEY FUNCTION I
1.
PCS set: for collecting the unit of the product.
2.
Unit weight set: for presetting the unit weight if you know the unit weight of the product.
3.
Hi/lo set: for presetting the upper and lower limit alarm.
4.
Tare preset: for presetting the know tare.
5.
Clear: for clearing the inputted number and accumulated records.
6.
Accumulation: for accumulating weight and total quantity.
7.
Zero: for clearing the slight weight and back to zero.
8.
Tare: for deducting the tare.
9.
Accumulation display: for seeing the accumulated records.
10
0~9: numeral key, for inputting the unit weight or other numerical value.
11.
For inputting radix point and submenu selection key.
KEY FUNCTION II
1.
Zero: press and hold [zero] unit enter single-point calibration mode.
2.
Alarm preset: press and hold [ ] before turning the scale on, and then you can enter the menu set.
3.
For a long time to switch the backligh mode.
6. OPERATION
HORIZONTAL ADJUSTMENT
The level of the scale should be checked firstly. Adjust the four feet to center the bubble on the scale.
WEIGHING
Turn the scale on. The display screen will show number 1 to 9 for self-testing. After that, the three display screens will show "weight",
"unit weight" and "total quantity". Now put the product in the middle of the scale. The weight screen will show the weight and a stable
signal "o". Input the weigh unit corresponding to the product to the unit weight screen. The total quantity screen will automatically cal-
culate and display the correponding total quantity.
ZERO
When no product or slight weight on the scale, you can press
maximum weight, the
key will be ineffective.
All manuals and user guides at all-guides.com
Counting scale
back to zero. When the product weight is 10% heavier than the
User's Guide
15

Publicité

loading