Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Code
Parameter
4 = play message no. 4 (short msg.)
52
5 = play message no. 5 (short msg.)
6 = play message no. 6 (long msg.)
7 = play message no. 7 (long msg.)
8 = play message no. 8 (long msg.)
9 = play message no. 9 (long msg.)
Upon entering configuration step code 52 and the corresponding
no. of the message to be played, the device will automatically play
the message in question. Playing the message will automatically
stop after the message has elapsed. You may stop the message
playing by pressing the # key.
Please note: You may only play the long messages no. 7; 8 and
9 after you have previously set a corresponding amount of long
messages under configuration step code 50.
Voice message during a direct call: Default setting: 0 0 0
58
x [beep] y [beep] z [beep]-
x = voice message before the direct call number is dialled
y = voice message while waiting for the call to be picked up
z = voice message after the called party has picked up
The following entries are permitted for x; y and z:
0 = No voice message
1 = Play message no. 1
9 = Play message no. 9
Via this configuration step, you may set up to 3 voice messages to be
played during a direct call (dialling of a number previously stored in the
device). During this configuration step, the device requires the entry of
three cyphers from 0 to 9 to specify the voice message to be played.
The first cypher determines the voice message to be played prior to
dialling the telephone no., e.g. a message like "Direct call activated"
(entering the cypher '0' means that no message will be played). The
second cypher determines the voice message to be played repeatedly
while the connection is being established, e.g. a message like "Please
hold the line." The third cypher determines the voice message to be
played upon picking up by the called party. This message will also
only be played to the called party, e.g. a message like "Call from your
intercom system." This configuration step will affect all direct calls.
For example:
Provided that you recorded the following voice messages via con-
figuration step code 51:
... continued on the next page
www.behnke-online.com
Instructions series 5
Configuration and Set-up
Confirmation
#
#
#
#
#
#
#
GB
55
Publicité
